For more information about our rental equipment, click on a category above. You can also download the latest version of our line card.

Download the Nationwide Line Card


Home Products Displays and monitors LED Barco DX-700 Processor

Barco DX-700 Processor

Barco DX-700 Processor

Key Features

Inputs

1 x Analog input (HD-15)

  • All resolutions supported to a maximum rate of 240MHz (progressive or interlaced scan).
  • 10-bits/color sampling

1 x 3-BNC input

  • All resolutions supported to a maximum rate of 240MHz (progressive or interlaced scan).
  • 10-bits/color sampling
  • Supports composite NTSC/PAL/Secam, S-Video (Y/C) and Component RGB or YPbPr w/Sync-on-G (Y)
  • Supports Tri-level sync

1 x DVI Digital input

  • All resolutions supported to a maximum rate of 165MHz (single-link) or 240MHz (dual-link).
  • Supports both RGB and YCbCr, progressive or interlaced.
  • Supports single-link and dual-link
  • Also used as Expansion Input port when linking units together

2 x HD/SD SDI input

  • 525/60 (NTSC) and 625/50 (PAL), per SMPTE 259M
  • HD 720p per SMPTE 296M, HD 1080i per SMPTE 292M
  • Supports single-link and dual-link
  • Dual-link HD-SDI modes supported per SMPTE 372M:
    • 1080p, 4:2:2 YCbCr, 10-bit up to 60Hz
    • 1080i or 1080p/PsF up to 30Hz with:
      • 10-bit 4:4:4 RGB or YCbCr
      • 12-bit 4:4:4 RGB or YCbCr
      • 12-bit 4:2:2 YCbCr
Outputs

Triple DVI-style connectors supporting the Barco Legacy 32MHz LED Output protocol.

  • Each output can drive a different type of Barco LED product.
  • Large displays can be driven by combining multiple outputs.
  • 2 output cards (6 outputs) are required to output 2K x 1080 to 1080 x 2K.

Triple HDMI-style connectors supporting the Barco high-resolution NNI LED output protocol.

  • Large displays can be driven by combining multiple outputs.
  • The 2K x 1080 to 1080 x 2K output resolution can be achieved by combining the 3 outputs on a single NNI Output Module.
User Control

Front Panel Display

  • VGA touch panel Display, Display setup wizard, Source setup wizard, Preset management menu, Source alignment menu, Display management, DX-700 management

Front Panel Buttons

  • Six softkeys are used to access menus and activate functions.
  • Five navigation buttons are used to navigate through menus and lists.
  • Black button. This button places black on all outputs.
  • Test pattern button. This button takes you directly to the Test Pattern Generator Menu.
  • Presets button. This button takes you directly to the Preset Management Menu.

Remote Control

  • Fully controllable over IP
Base unit

Width:

  • 19" Rack

Height:

  • 5RU

Input/Output Connectors

  • All Input and Output connectors are located on the back.
  • The connections with the system module are located on the back.
    • RJ-45 connector for communication with DTS.
    • Analog (HD-15) and Digital (DVI-I) monitor output connector are located on the back.
    • DMX IN and DMX THROUGH connectors.
    • DIAGNOSTIC RS232 connector (for system diagnostics only)

Power

  • 100-240 VAC, 50-60 Hz, Auto selecting

Call to Order